#35 sprocket MY1020 1000W 48V GoKart Motor Controller and Foot Throttle #35 sprocket MY1020 1000W 48V GoKart Motor Controller and Foot Throttle Unite MY1020 1000 Watt 48 Volt DC MOTOR with mounting bracket + 1000W SPEED CONTROLLER YL-03 + Foot (Pedal) Throttle (compatible with the speed controller) Brand new with warranty. Motor comes with a #25 sprocket but we add a extra #35 sprocket in the box. Buyer must change the sprocket. To change it, hold tight the sprocket with a Vicegrip and turn the nut as if you wanted to tighten it. The Nut is reverse throttle, so if turned clockwise, it will get extra. -ATTENTION: To remove the OEM sprocket, note that the thread is a reverse thread, so to loosen it, you must turn the nut clockwise. - MY1020 type motor for electric scooter, control box and throttle can be used for mini bike quad and Go-Kart. It may also work for bicycle. Or do it yourself enthusiasts. Wiring diagrams available at request when shipping. Motor Specs: - 48V DC 20.8 amps - Max 1000 Watt - Max 3000 RPM - Chain drive (11 teeth sprocket) #25 (1/4" pitch) + #35 (3/8" Pitch) Sprockets - Type of motor: DC, Brush - Reversible - 12 gauge leads - Permanent Magnet Dimensions:    - Diameter: 4 1/4"    - Length (no shaft): 5 1/4"    - Length (with shaft): 6 1/4" This motor should work in some Xtreme or Razor electric scooter, mini bike or go-kart using a 1000W motors that looks similar to this one. Should also work with any other brand with similar specs in motor.... Please check connector type and motor size and specs. before buying as replacement. Please ask us if you need to know any specific dimensions for this motor so you can be sure it will work for you. ___________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________ Control box (speed controller) specs: Dimension: aprox 3.5" x 2.5" x 1.5" Weight: 10 OZ Brand: YALU Model: YL-03 - Nominal Power: 1000W - Peak Current: 40 amps - Max Voltage: 54V - Cut off Voltage: 42V This speed controller features connection terminals for:  - Battery - Motor - Charger - Lock / on-off switch - Brake (will shut off motor) - Battery charge indicator - Tail lamp - Throttle ___________________________________________________________________________________________________________________ ___________________________________________________________________________________________________________________ Foot Pedal Throttle:  Universal Black Electric Scooter Bike Foot Throttle 3Wire 12V 24V 36V 48V   Specifications: - Brand new - Electric Bike scooter Foot Throttle accelerator - Compatible with 24v/36v/48v E-scooters (using 3 wires on the speed controller). - Cable length is approximately 40 inches - Wiring instructions: Throttle Controller Description Red connects to Red Voltage 4.3 to 5.0 Volts Black connects to Black or Yellow Ground Green connects to Green, Blue or White Speed Adjusting Signal (0 to 5 Volts) We also sell other electric scooter parts and mini Bikes  Most orders ship same day from our warehouse  Warranty: 12 months from purchase date. We will only replace motors that do not work out of the box.  We test all motors before shipping. We will not replace burnt out motors.

#35 sprocket MY1020 1000W 48V GoKart Motor Controller and Foot Throttle

Code: #35spkMot-MY1020-1000-48CP+contyalu+Foot Thr

MY1020 1000 Watt 48 Volt DC MOTOR with mounting bracket
+
1000W SPEED CONTROLLER YL-03
+
Foot (Pedal) Throttle (compatible with the speed controller)



Brand new with warranty. Motor comes with a #25 sprocket but we add a extra #35 sprocket in the box. Buyer must change the sprocket. To change it, hold tight the sprocket with a Vicegrip and turn the nut as if you wanted to tighten it. The Nut is reverse throttle, so if turned clockwise, it will get extra.
-ATTENTION: To remove the OEM sprocket, note that the thread is a reverse thread, so to loosen it, you must turn the nut clockwise.

- MY1020 type motor for electric scooter, control box and throttle can be used for mini bike quad and Go-Kart. It may also work for bicycle. Or do it yourself enthusiasts. Wiring diagrams available at request when shipping.


Motor Specs:
- 48V DC 20.8 amps
- Max 1000 Watt
- Max 3000 RPM
- Chain drive (11 teeth sprocket) #25 (1/4" pitch) + #35 (3/8" Pitch) Sprockets
- Type of motor: DC, Brush
- Reversible
- 12 gauge leads
- Permanent Magnet

Dimensions:
   - Diameter: 4 1/4"
   - Length (no shaft): 5 1/4"
   - Length (with shaft): 6 1/4"


This motor should work in some Xtreme or Razor electric scooter, mini bike or go-kart using a 1000W motors that looks similar to this one. Should also work with any other brand with similar specs in motor.... Please check connector type and motor size and specs. before buying as replacement.

Please ask us if you need to know any specific dimensions for this motor so you can be sure it will work for you.

___________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________

Control box (speed controller) specs:
Dimension: aprox 3.5" x 2.5" x 1.5"
Weight: 10 OZ
Brand: YALU
Model: YL-03

- Nominal Power: 1000W
- Peak Current: 40 amps
- Max Voltage: 54V
- Cut off Voltage: 42V


This speed controller features connection terminals for: 
- Battery
- Motor
- Charger
- Lock / on-off switch
- Brake (will shut off motor)
- Battery charge indicator
- Tail lamp
- Throttle

___________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________

Foot Pedal Throttle: 


Universal Black Electric Scooter Bike Foot Throttle 3Wire 12V 24V 36V 48V

 

Specifications:

- Brand new

- Electric Bike scooter Foot Throttle accelerator

- Compatible with 24v/36v/48v E-scooters (using 3 wires on the speed controller).

- Cable length is approximately 40 inches

- Wiring instructions:

Throttle


Controller

Description

Red

connects to

Red

Voltage 4.3 to 5.0 Volts

Black

connects to

Black or Yellow

Ground

Green

connects to

Green, Blue or White

Speed Adjusting Signal (0 to 5 Volts)




We also sell other electric scooter parts and mini Bikes 



Most orders ship same day from our warehouse 

Warranty: 12 months from purchase date. We will only replace motors that do not work out of the box.  We test all motors before shipping. We will not replace burnt out motors.

Shipping:

 

 

Free Standard Shipping


All customers with shipping addresses within the contiguous 48 United States are eligible for Free Standard Ground Shipping when program criteria is satisfied. Custom priced, bulk priced, or item exclusions are not eligible for free standard ground shipping. 

 

 

Shipping Options


Standard Ground Shipping

 

How many days does my order ship?


We send a maximum of one business day all our orders in which we handle the dispatch.

 

 

Warranty:

 


Most of our product line is covered by warranty. As a general rule of thumb, please refer to your item's listing before purchase, to verify warranty details. (Below you will find a list of some of our most popular products)
To be considered for warranty coverage, all items must be returned in excellent condition. Properly packaged to withstand the rigors of shipment. Clearly identified with details required such as order number, username, date of purchase. Product must be clean. No elements outside of what was shipped should be included in your products returned for warranty. 

 

 

Electric Motors: 

 

WARRANTY: 

12 Months from purchase date. We will only replace motors that do not work out of the box.  We test all motors before shipping. We will not replace burnt out motors.

 

 

Controllers:

 

WARRANTY: 

Dead on arrival: 1 Year after receiving the product. We'll refund (except s&h cost) or replace. Item must be as new, with no sign of short circuit, drop or abuse. 

 

 

Throttles:

 

WARRANTY:

12 months from purchase date. Write us before returning, most of the times, problem is wiring or controller.

 

 

Chargers:

 

WARRANTY:   

12 months  from purchase date. We will only replace components that do not work out of the box.  We test before shipping. We will not replace burnt out or short circuited components.




Straps: 


WARRANTY: 

30 days after receiving the product, no questions asked, we'll refund (except s&h cost) or replace. Items must be new, with no use, stains or marks.
12 months for manufacturing defects. Part will be exchanged for a new one. 

 

Shocks: 

 

WARRANTY:     

14 days after receiving the product, if the product was incorrectly dispatched., we'll refund or replace. Items must be as new, with no scratches or dents. 
3 months for manufacturing defects. Part will be exchanged for a new one. No refunds.

 

Bow Shackles: 


WARRANTY:     

30 days after receiving the product, no questions asked, we'll refund (except s&h cost) or replace. Items must be as new, with no use, stains or marks.
2 Years for manufacturing defects. Part will be exchanged for a new one.  

 

Roller Fairlead: 

 

1 Year for manufacturing defects. Part will be exchanged for a new one.   

 

 

Quick Connect:


WARRANTY:   

12 MONTHS from purchase date.

 


Snatch Blocks:

 

WARRANTY:   

12 MONTHS from purchase date.

 

 

 

Returns: 


If you have a technical issue and have not been able to use your product, please be sure to contact us by email at alfawheelsinc@gmail.com for further assistance before initiating any return.

All items must be returned in excellent condition. 
Properly packaged to withstand the rigors of shipment. 
Clearly identified with details required such as order number, username, date of purchase. Include your return ID/RMA if available. 
The product must be clean. No elements outside of what was shipped to you should be included in your returns (batteries, food, trash, etc). 
Reason for return must be clearly stated. ("it did not fit", "it does not work", "I did not like the product" are all fine examples of this)
If the product has a label, it must be affixed to the product in a new-like condition. 
Returns must be processed online. 
A deduction fee will apply if any of the above listed is an issue.Â